Do you have a Class I Galvo Driven Laser Marking System and an operator who stands idle in front of the machine for anywhere from 30 seconds per part to potentially a few minutes for every batch of parts loaded into the Laser Marker? If you have high volumes of product to Laser Mark, this time spent idle can greatly increase the overall time needed to process the parts you need.
Consider the freshly redesigned Galvo Driven (Class I) Rotary Dial Index Laser Marking System for 2018 by TYKMA Electrox supplied by Millennium Signatures Marking Systems Inc.
This system is designed for additional efficiency over conventional Box Marking Enclosures with Manual or Automatic Door Systems.
These systems have a robust rotary table that is set-up to rotate 180 Degrees upon command at the end of each “marking cycle”. This allows an operator to be unloading parts that have just been marked and reload the fixture with fresh new parts at the very same time as the parts previously fixtured on the other half of the table are actively being marked. Once the cycle is complete and fresh (unmarked) product has been loaded there is a touch activation process that requires both hands to rotate the new parts in for processing at the same time as finished parts are presented back to the operator for unloading.
It’s a safe process, the Laser System is designed to provide Class I protection with a KG-3 Protective Viewing Window and integrates light curtains that will instantly stop the system in its tracks should the light curtain be interrupted or obstructed why the table is rotating.
It’s a much faster, more efficient process for applications that have high volumes of the same parts to be marked.
For more information on this system and various other system designs, contact our Technical Sales Team at Tel: (905) 639-0909 or by e-mail at firstname.lastname@example.org.
We are the Part Marking Specialists.
DOT PEEN MARKING SYSTEMS
VIBRO-ETCH MARKING PENS
CUSTOM MARKING INKS
CUSTOM PART MARKING SERVICES
Check out our ad in this months issue of Fabricating and Metal Working. We are promoting our Marksman Line of Computerized Dot Peen Marking Systems ahead of the FABTECH show coming up in November 2017.
Marksman by Millennium Signatures is a very comprehensive line of Pin Marking (Low-Stress Computerized Stamping) Equipment that is available in several formats including Bench Top, Hand-Held Portables, and our Compact (Universal Mount) Integrator Series Marking Heads. We have beautifully designed systems for Circumferential Marking applications. We have Corless (Battery Powered) Hand-Held Portables which make permanently identifying heavy components and/or large fabrications easier than ever!
With facilities in Burlington ON, Canada, and Buffalo NY, USA both fully stocked with all models and all replacement parts to support future after sales service and support requirements.
Millennium Signatures is pleased to announce that we are now equipped with even more state-of-the-art laser equipment allowing us to demonstrate the capabilities of our Galvo Driven Laser Marking Systems to those visiting our facility. Our Canadian Facility located in Burlington, Ontario is now equipped with a 20-Watt Minilase Manual Bench Top System (Class I Configuration), a 20-Watt Scorpion Rapide II ZEP Multi-waveform Z-Mode Laser (Class IV Configuration) and most recently the 50-Watt Scorpion Laser (Class IV Configuration). We have acquired this laser complete with a 160mm, 254mm and 350mm multi-element Flat Field Lens Assemblies to be able to demonstrate a wider range of capabilities and enhance the range of our Application Testing Services. The 50-Watt Laser will be capable of delivering the same ultra high quality marking we are known for with shorter cycle times and deeper marking results if required. Millennium Signatures is always investing in NEW equipment and the capability to service our clients with better efficiency.
To arrange a visit to see demonstrations of any of our Marking Technologies demonstrated, please be sure to contact our Technical Sales Team at T: (905) 639-0909
THE MINILASE SERIES available from Millennium Signatures Marking Systems Inc.
An incredible solution or companies that have been wanting to have their own Galvo Driven Laser Marking capability in-house. The Minilase Series offers an easy solution because it’s the whole package is a very clean simple offering. It’s not complicated, the Minilase machines are nice and compact bench top designs that are very well constructed extremely SAFE and EASY to use. These systems are designed to meet CDRH Class I specifications. They are all state-of-the-art Galvanometer based systems that provide incredible power density at its focal point and delivers lightening fast, razor sharp imaging as good or better than you will find on any Galvo Driven design anywhere. Leaps and bounds more efficient and more precise than Flat Bed Flying Optic based technology. Minilase is a favorite of many because it just makes buying a Fibre Marking Laser simple. All systems are easily portable. They all regular standard 110-Volt power and they are all air-cooled. It’s truly the best value you will find for the money. If you’re looking to do it right, you want to purchase a Minilase!
If you should be faced with larger, heavier parts or configurations that require multiple axis material handling capability, there are our other products such as the Zetalase Series, or our Customizable Integration Series Lasers known as “The Scorpion Series” and/or “The Vereo Series”. All of these laser systems are built right here in the United States of America 🇺🇸 in a brand-new 100,000 sq.ft. TYKMA Electrox facility in Chillicothe Ohio.
Millennium Signatures Marking Systems Inc has partnered with TYKMA Electrox in the capacity of Exclusive Canadian Distribution, Field Service and support because we have over 27 years in the Laser Marking business and we wanted only the highest quality systems and from a highly organized, local operation with great communication and giving us easy access to product. TYKMA Electrox is very aggressive with leading the industry with new innovation and we are proud of the products they build. It is our pleasure to be able to bring these laser products to the Canadian Marketplace and provide full sales support, application testing and demonstration capabilities as well as highly trained technicians that can provide fast and effective fully outfitted on-site support if needed in the future.
We have an inventory of product and replacement parts in stock at all times.
GALVO LASER MARKING TECHNOLOGY, by Millennium Signatures Marking Systems Inc.
Millennium Signatures is proud to supply, integrate and fully support the Scorpion Fibre Laser Marking Series.
These systems are available in 10-Watt, 20-Watt, 50-Watt and 100-Watt configurations as well as the 20-Watt and 70-Watt ZEP extended performance Z-mode Lasers offering 36 waveforms by special order. This 110-Volt, Air-Cooled, Generation of Laser Marking Series has been highly successful for Millennium Signatures Marking Systems since coming to market in 2008 / 2009. They install easily, the are extremely reliable and the performance and capabilities of these system are state-of-the-art. These systems can be supplied as a Class IV Laser or integrated into any of our various protective workstations such as the EMS-400, creating a CDRH Class I Marking System. These lasers can be easily outfitted with F-Theta Flat Field Marking Lens that include 100mm, 163mm, 254mm, 350mm and 410mm Effective Focal Length (EFT) Lens. This essentially mean that we can provide systems with marking areas ranging from approximately 2.5″ square to nearly 16″ square at the part marking surface.
These systems have proven highly effective at marking a huge range of sub-straights including almost all metals, plastics, ceramics, and a wide range of unique coatings and synthetic materials. Millennium Signatures is equipped with an in-house applications lab which can not only demonstrate the capabilities of this magnificent marking technology, but we can confirm exactly what type of marking results and cycle times you can expect from this equipment on your exact product. These lasers are compact and very versatile allowing them to be easily integrated into automated cells and assembly lines.
Contact our Technical Sales Team for more information on what our Scorpion Marking Lasers can do for your manufacturing operation.
When you are faced with having to track a part and you need to get all the necessary information on the part, in the right location and have it clearly readable even after exposure to harsh environmental conditions and potentially many years into the future, Millennium Signatures Marking Systems are the specialists to consult.
With over 55 years experience in the Part Marking and Product Identification business, Millennium Signatures has a highly skilled team of Application Technicians who can take your part and learn your requirements and quickly recommend the best technology to use to accomplish this goal!
We have a very advanced Applications Lab equipped with everything from Hand-Held Air Vibro Etching Pens, Electro-Chemical Etching, Pad Printing, Scratch Marking Devices, TYKMA Electrox Galvo Driven Laser Marking Technology and our Marksman Series Computerized Dot Peen Marking Systems among others, which will allow us to confirm the results on your parts and offer live demonstrations of the solutions we offer.
Millennium Signatures holds a large inventory of Equipment, Accessories and Supplies in stock at both our Burlington, Ontario Canada and Buffalo, New York USA facilities so that in most cases we can get you what you need very quickly!
Contact our Technical Sales Team today for more information on the dynamic range of products and services Millennium Signatures can assist your operation with today!
COMPACT FUME and PARTICLE EXTRACTION SYSTEMS for use with your Laser Marking Systems
Millennium Signatures has a great selection of Powerful, Compact and perhaps most importantly QUIET operating Fume & Particle Extraction Systems which are perfectly suited for use with our Electro-Chemical Etching and Laser Marking Systems. Our systems have been carefully designed to provide controlled extraction of both fumes and debris or particulate that is a by-product of the Laser Marking process right close to the source. All of our systems have been designed to contain the extracted contaminants in a multi-stage filtration system which is good for the environment and intended to run continuously (100% Duty Cycle) so you need not worry about burning out motors or other damage due to long run times.
We have a few different models, but some of the features that are available on our systems include:
Integrated ON/OFF communication with Laser System Software.
High Capacity Filters allowing several years between changes in most cases.
Our systems effectively handle the extraction of Particulate also which is not often the case with most other extraction systems.
When most people think of the need for an extraction system it is usually for reasons of the health and safety for the systems operator, as it should be. However there is another very strong cost saving advantage to our extraction systems that is that they also aid heavily with the health and longevity of your equipment. It’s very common with Laser Marking / Engraving Systems that are used for long or continuous runs Marking products will certainly create some particulate by-product in many cases a metallic dust that will take its toll on optics, cooling passages, electronic circuits etc. A clean system is a smooth running, trouble free system for years and years to come. Our Fume and Particle Extraction Systems have proven their worth many times over throughout the past 28 years and we can arrange to add to your existing system(s) or include as part of a new upcoming system purchase.
Millennium Signatures Marking Systems Inc., is the exclusive Canadian Distribution and Technical Field Support Team for TYKMA Electrox in Canada. Millennium Signatures supplies both the Scorpion Series Lasers as well as the Vereo Series Integration Lasers. This diverse range of Galvo Driven Laser Marking Technology can be used within a number of our standard Class I Marking Enclosures as a completely contained system or used as part of a custom integration into an Assembly Line or as part of an Automated Production Cell. These Lasers are offered in a range of power outputs including: 10-Watt, 20-Watt, 50-Watt, 70-Watt and 100-Watt in the Yttrium Fibre configuration. We also offer a 30-Watt Galvo Driven CO2 Laser called the Razor.
We offer presently offer two (2) different Software Platforms known as ” Scriba” and “Minilase Pro SE” which are both packed with capability, but different and appeal to different users. The Minilase Pro SE software is the platform used with the Vereo and Minilase system designs and the Scriba software is the platform used to drive Scorpion Series systems.
If you are looking for a complete CDRH Class I solution, we have a very capable range of systems available from our smaller Minilase Bench Top Systems to our Minilase XL and Zetalase models. For larger, heavier part processing we have the EMS Series Systems which are multi-axis system designs which easily accommodate Lasers of all sizes.
In addition to being able to accommodate larger parts, the EMS-400 and the Zetalase XL systems offer much larger marking fields including 200mm x 200mm without and programmables stages or other manipulation of the part.
For more information on these systems as well as a lot of customized hardware and software solutions we can offer, contact our Technical Sales Team at 905-639-0909 or by e-mail at email@example.com