Millennium Signatures 73XNW Aerospace Grade Marking Inks which are suitable for use as Inspection Stamp Identification Ink for “reduced out-gassing applications” are readily available as we keep fresh-made batches on the shelf at all times. We can offer this ink which is designed to meet several Aerospace Specifications including BAMS 516-007 TY.I CL.A, BAC 5307, PCS 6000, 2ZZ900006 and more…
It is available in BLACK, WHITE, RED, BLUE, SILVER, GREEN and ORANGE.
We can provide technical specification on its Application, Storage, Details on Adherence, Drying Time, Shelf Life, Out Gassing Characteristics as well as Certificates of Compliance and MSDS/SDS Data
Recommended storage temperature is 65 to 85 Degrees Fahrenheit
When properly applied, this ink meets or exceeds the performance requirements of G.S.A. Specification: A-A-208 TYPE I
We also sell the corresponding solvent known as “Reconditioner” This product is the properly matched solvent allowing the 73X Series Marking Ink to be thinned out for application, refreshed as it starts to age and also very important for clean-up application. If mistakes are made during application you want to have the proper solvent on hand to allow it to be easily removed before trying again.
For more information on this and other Marking Systems & Services geared to suit the needs of all industries including Aerospace, Nuclear, Medical-Surgical, Oil & Gas, Automotive, Welding & Fabrication Industries and many more, contact the Part Marking Specialists at Millennium Signatures Marking Systems Inc.
At Millennium Signatures Marking Systems Inc., our whole world revolves around effective Part Marking Systems, Services and Solutions daily. Some Marking requirements are quite simple, based mostly around appearance and not being easily removed. However, for 30 years we have specialized in supporting The Aerospace, Nuclear and Medical-Surgical Industries among many other industries with meeting their more complex and technical marking requirements.
This could mean permanently marking a surface coating without breaching its protective properties. It could mean providing a clean, deep and professional-looking Low-Stress Chemical Etch to depths that would withstand anything from environmental exposure to naturally occurring abrasion for decades on a vital aircraft component.
It means that we are extremely knowledgeable when it comes to providing “Lab Tested & Certified Products” for Nuclear Part Processing ensuring that specific products are to spec on Halides and Chlorides and conform to all the guild lines you’ve been asked to follow.
No matter what your Part Marking requirements might be, contact the Part Marking Specialists at Millennium Signatures. Allow our team to get you your best possible mark, time and time again…
Contact us toll free (833) 219-1212
Local (905) 639-0909
Millennium Signatures is 100% focused on how to get the best marking possible on your parts. The world of identification is so powerful today and we can help you use the latest in Marking and Coding technology to meet all your customer requirements and promote and market your products better!
Millennium Signatures Marking Systems Inc. knows how to meet various specifications and routinely works with the Food, Drug and Pharmaceutical Industry, The Aerospace Industry, The Oil & Gas Producing Industries, The Nuclear & Power Generation Industry, The Automotive Industry and The Steel Industry among others. As a complete Product Identification & Traceability Company, we manufacture and/or distribute many technologies from Custom Engraved Steel Stamp & Dies to Electro-Chemical Etching, Computerized Dot Peen Marking, Computerized Engraving and Galvo Driven Laser Marking Systems. We formulate Custom Marking Inks & Solvents for direct, offset and Inkjet Marking applications. We manufacture Metal Nameplates custom to suit the exact needs of the customer, we produce Custom Cut Rubber Stamps & Dies and an extensive range of Custom Cut Stencils from Mylar, Oilboard, Plastics and various Metals. It’s hard to make mention of all the bases we have cover to help look after all of your Part Marking requirements.
Give us a call. Our Part Marking Specialists are here to review your requirements and assist you.
Call us Toll Free at (833) 219-1212
or using our local (905) 639-0909
You’re always welcome to reach us anytime by e-mail at email@example.com
We really are a Manufacturer’s “One Stop” for Marking Systems & Services. Millennium Signatures has over 50 Years of experience helping people get their parts marked with precision, speed and efficiency. Working with all industries including Aerospace, Nuclear, Medical/Surgical, Automotive Oil & Gas, The Steel Industry and more. From a very basic hand-stamp you strike with a hammer, through to fully automated Laser Marking Technology, we have solutions to fit every requirement. We also provide a dynamic range of services to support your unique requirements.
Contact our Part Marking Specialists at Millennium Signatures Marking Systems for more information on how we can support your applications.
T: (905) 639-0909
E: firstname.lastname@example.org or
W: millenniumsignatures.com or marksmanmarkingsystems.com
Millennium Signatures Marking Systems Inc. can produce Marking Inks made to your exact specifications for all your ink print applications. We can take a sample of your existing ink or solvent and reverse engineer it to determine your exact requirements and produce the exact same product at potentially a much better price point. We can handle supplying the Marking Inks in small or large volume containers and cartridges.
We support a lot of continuous marking applications such as Tube Marking, Extrusion Marking, Steel Strapping, Carpeting and more.
We also have Aerospace Grade Marking Inks and Polyurethane Top Coat Products in stock!
Contact the Part Marking Specialists at Millennium Signatures Marking Systems to learn more about our Custom Inks & Solvents Division.
T: (905) 639-0909
There are many different industries that use our CUSTOM CUT STENCILS for one application or another and Millennium Signatures is a Fast and Cost-Effective source for all your stencilling needs. At Millennium Signatures we have the technology to create Custom Cut Stencils from a wide range of materials including, but not limited to Stainless Steel, Brass, Aluminum, Copper, Plastic, Mylar and Oilboard, custom to your specifications.
These stencils could be used for marking everything from Highway Construction Barriers, Shipping Crates, Overhead Pipe, Entrances and Exits, Apple Crates, Aircraft Components etc. If you need having a stencil created for a Marking Application including even Chemical Etching or VIN Etch Stencils, give us a call.
Millennium Signatures had been in the Marking Products business for over 30 years and we have invested in several technologies allowing us to provide this range of product and services to our customers.
Millennium Signatures has an in-house Artwork Department that makes creating these stencils to your specific requirements easy. Provide us with a concept of what you need and one of our Graphic Designers will create a DRAFT for your review. Once any changes that may be needed are made and the artwork is signed off, the stencils go into production and are cut from the size, shape, thickness and material type you request.
If you have any questions, please contact our Technical Sales Team at our Buffalo NY, USA or Burlington ON, Canada facilities.
Call: (905) 639-0909
S73XNW Aerospace Grade Marking Inks for the marking of Aerospace Components as per various Aircraft Component Part Marking Specifications.
Millennium Signatures carries fresh batches of the S73XNW Series Marking Inks in stock. We carry these Inks in Black, White and Red and other colours are available but need to be formulated upon request.
These Marking Inks are sold in 16oz containers.
The corresponding solvent used for thinning the ink and clean-up applications is called S73XNW and it’s also maintained in stock and sold separately in 16oz containers.
Maintained in stock at both our Buffalo NY, USA and Burlington ON, Canada locations. Datasheets and certifications available upon request.
Custom made RUBBER STAMPS and dry ink pads are also available to suit.
Millennium Signatures maintains stock of fresh batches of 73XNW Series Aerospace Grade Marking Inks. These products are often required by specification to be used when marking some Aerospace components. We maintain fresh stock of three (3) colours including BLACK, RED and WHITE. We also have the corresponding Reconditioner (Solvent) which is used for thinning the ink or clean-up applications. Millennium Signatures also manufactures a variety of other Solvent and Water Based Inks for various Marking Applications, specializing in direct and off-set line printing applications such as Tube Mill and Extruded Products Marking.
It was 25 years ago today. I started out assisting in the effort to familiarize the manufacturing sector with the incredible capabilities of Galvo Driven Nd:YAG Lamp Pumped Laser Technology for Industrial Part Marking Applications. I custom integrated 50, 75, 100 and even 150-Watt Lasers into various different manufacturing environments one by one under the Canadian Laser Technologies label. 25 Years later the company has grown to become Millennium Signatures Marking Systems Inc., a full service company specializing in Product Identification & Traceability Systems and Services. Today we offer a diverse range of products which still include the latest in Fibre Laser Marking Technologysurrounded by several other technologies including:
Computerized Dot Peen Marking
plus a range of Products & Services such as specialty Marking Inks, custom made Signs, Nameplates and Labels. we have unique services such as our Laser Sintering process and our Custom Parts Marking Servicesfacility. Its hard to believe its been 25 years, but its a great feeling to look back at the growth of the various technologies and reflect upon the thousands of applications we have had a hand in developing. Over the past 25 years we have supplied solutions to assist in the manufacturing process of Aircraft Components, Parts for Nuclear Power Production, Medical & Surgical Instruments and hundreds upon hundreds of unique and interesting custom projects up to and including signage for high-end Fashion Designers and even Hollywood Movie props.
To all of our customers, old and new we thank-you for your support and the opportunity to work on new products and processes with you.