So much is NEW in Laser Marking Systems & Workstations
Millennium Signatures is pleased to offer a complete NEW line up of Scorpion Rapide Lasers including the New ZEP (Extended Performance) line for 2014.
Laser Enhancement Solutions
Custom System Structure - Pricing
Onsite Laser Service & Support
There have been huge advances in the standard workstations available in 2014. The New EMS Series Marking Enclosure provides a new look and lots of new features.
The EMS-100 is the smallest member of the EMS Series and is designed for entry-level applications where smaller components are being marked. This workstation requires a basic lab jack to be used for focus adjustment and is a safe Class I solution ideal and cost-effective for basic marking applications. The EMS-200 is an exciting NEW 3-sided Pneumatic Door design that is a medium-size member within the series. This design offers excellent access to the marking area from three sides. The system also offers a Key Access Interlock System Override that will allow the system to operate under controlled conditions with the door in the open position. This is ideal for those periodic applications when long or oversized components need to be marked but will not fit within the marking enclosure. The EMS-200 is also equipped with a 300mm Precision Programmable Power Z-Axis and can also accommodate such extras as our ZD-30 or ZD-80 Rotary Attachment for Circumferential Marking applications. All of our workstations are equipped to accommodate Fume Extraction devices as well.
The EMS-300 is the largest member of this series and it is a large free standing system which offers maximum versatility in terms of part size and available extras such as Precision Programmable X/Y Tables, Rotary Attachments, Indexing Shuttles and more. The MS-300 has removable side panels which can accommodate longer components in a Class IV configuration and is standardly equipped with a 300mm Precision Programmable Power Z-Axis with the option of being upgraded to a 400mm travel as well.
All of these EMS Series Workstations are made from heavy gauge materials and are exceptionally well designed for safety, throughput, and versatility.
Watch the video below to see the NEW Scorpion Rapide Series Laser c/w EMS-200 Marking Enclosure perform.
In this video, we have used a 20-Watt Fibre Laser (Scorpion Rapide II) to laser mark a very small (2.5cm long) component with an incredibly accurate radial scale consisting of graduations placed every 2.5 degrees and with numbers placed adjacent to the graduations that indicate every 10 degrees. The video illustrates the actual marking speed (2.5 Seconds) followed a few moments later by a replay of the marking process at a slower speed.
The overall cycle time to complete the marking of these parts to the specified tolerance specified by the client was 2.5 seconds per unit for marking time plus whatever time was required for the manual loading and unloading of the parts.
Using a 163mm Flat Field Optic you could load as many as 36 of these pieces into a system at one time and mark them all in a single pass in approx. 90 seconds. Using our 254mm Flat Field Optic you would be able to load as many as 98 of these same pieces at one time and mark them all in a single pass in approx 4 minutes. There are also many ways to automate such a process using Programmable X/Y Tables, Rotary Indexing Tables, Linear (Shuttle) Feeders and Conveyors etc. For more information, contact our Technical Sales Team at (905) 639-0909 or email us at email@example.com.
In addition to our own extensive experience with the manufacturing of Laser Marking Systems, Millennium Signatures has found Electrox built Laser Systems to be exceptionally high performing, reliable and cost-effective systems and fully endorses this product. Millennium Signatures is the Exclusive Canadian Representative for Electrox Laser Systems and provides full after sales service and support on all systems.
We are proud to announce that due to an exceptional track record Electrox Built Laser Marking Systems are given our Millennium Signature Series Product designation.
Laser Enhancement Solutions
Laser Marking Systems Model Specs
Scorpion Rapide Spec Sheet – PDF
Scriba Model Spec sheet – PDF
Scorpion Rapide – PDF
Minilase XL Datasheet - PDF
Advantages of Using Laser Marking
"an amplified beam of light, focused to a very small spot, to create a wide variety of images – very much like writing with a pen on paper"
Indelible Permanently – modifies the surface composition of the material
Clean and Safe – No inks, acids or solvents
Wide Range of Materials – Metals, plastics, rubber, etc.
Flexible Text, Graphics, Logos, Bar Codes, etc.
User-Friendly Software Driven
No Tooling to Wear – No direct physical contact with the workpiece
Cost Effective – Virtually no consumables
Popular Plug & Play Options:
Capabilities Depending on Hardware Combinations Chosen:
Laser Types Offered as Part of our Line-Up Include:
All of our Laser Models Offer the Following Features:
Laser Systems and Marking Results