Millennium Signatures “Marksman Series” Computerized Dot Peen Marking Systems is a comprehensive collection of equipment models, all offering their own unique features and abilities.
Among their many differences, they can be quite easily divided simply into two (2) groups just by the drive technology they are equipped with.
We have the Precision Reinforced Cog Belt Driven models and the slightly higher-end Ball Screw Driven models. While it’s true the Ball Screw Technology does have some advantages over the Reinforced Cog Belt Driven models, don’t fall into the thinking that the Reinforced Cog Belt Driven Systems are inferior or not worthy for those of you who believe strongly in buying a good product and doing things right the first time!
It is true that Ball Screw is a little more precise and does have better registration, repeatability long term, but the reality is they really only show an advantage in some situations. For example, if you are doing Machine-Readable Codes all the time on a regular production basis and your markings are not only required to be clean, sharp and precise to the naked eye, but also to today’s world of high definition scanning technology, then yes there would be an advantage to going to a Ball Screw Design for the very best possible code generation. Ball Screw is also beneficial when it comes to longer distances as in the X or Y-Axis travel of your Marking Head. Our Model MH-250 Marking Head which features a larger marking area of 250mm (9,84”) x 250mm (9.84”) is an example of where we use the Ball Screw Drive mechanism because it allows for us to maintain a tighter tolerance over a greater span. If we build custom Marking Heads for a customer that cover an even larger span, naturally we would continue to stay with the Ball Screw Drive.
Ball Screw is also a little longer lasting, so should your machine be running around the clock or performing a very high number of cycles every hour ongoing then this might be a reason to invest in the slightly more expensive Ball Screw Driven Technology. Ball Screw Systems also yield some additional benefit when marking really small characters. The extra precision of these units will start to show when marking characters under 2.0mm in height with one of our precision marking tips such as the PH-16 or the LP-06.
However, eight or nine of every ten Computerized Dot Peen Marking Systems sold are based on the Precision Reinforced Cog Belt Driven Technology and it is not to be underestimated. It is remarkable the character generation and repeatability these systems provide, year after year. They are also highly proficient at Barcodes such as 2D Matrix, UID and QR codes, it’s only recommended to upgrade if these markings are very high in volume.
When demonstrating these systems, most clients will not even ask to see the Ball Screw Driven models as they feel it is not at all necessary. The marking is extremely clean and the codes read perfectly. The feedback we get from clients that have owned these systems for years, consistently indicates that they continue to perform like new. There is no noticeable deterioration and they are very happy with the reliable, maintenance-free experience they have had.
We have a lot of great Marking Systems for you to see. Regardless which Drive Design you feel is right for you, Marksman Systems are extremely well designed, easy to use and very well priced.
Contact our Part Marking Specialists for more information.
T: (905) 639-0909
W: millenniumsignatures.com and
#MarkingSystemsCanada #MarkingSystemsUSA #MarkingTechnologies#EngravingSystems #EtchingSystems #LaserMarking #PartMarkingCanada#PartMarkingNorthAmerica #DotPeenMarking #AerospaceMarking#MarkingProducts #MarkingMethods #BallScrewMarkers #BeltDrivenModels#Marksman #MarksmanMarkingSystems